123.hp.com/envy4510 – Wireless device setup for Mac OS

/123.hp.com/envy4510 – Wireless device setup for Mac OS
123.hp.com/envy4510 – Wireless device setup for Mac OS 2017-11-01T01:53:51+00:00


For  assistance call, +1-888-597-9290


The 123.hp.com/envy4510 is a compact printer that can assist in your daily office chores to print, scan and copy important documents. This article describes in detail, how you can setup this device for a Mac operating system.

  • To begin the wireless setup for Mac, make sure your printer, router and your computer are all switched on.
  • Make a note of the name of your network along with its password.
  • Another requirement is that the printer, router and the computer should be connected to the same WI-FI.
  • When you are doing a wireless setup, it is very important that you remove all other cables such as the Ethernet and the USB cables.
  • You will still be needing your printer’s power cable to connect it to a power source.
  • If you already tried connecting to some other wireless network or the same network, it is mandatory to reset the wireless settings.
  • You know that your printer is awake when the power indicator light is bright, else your printer is in sleep mode.
  • Make sure that the wireless light on your printer is also blinking.
  • If not, press and hold the wireless and the cancel buttons simultaneously for 3 sec.
  • Your hp.com/envy4510printer now needs to be installed with the printer software and the necessary drivers.


Call Now

Call us @+1-888-597-9290 for Support, Installation and trouble shooting for your HP Printers

Call Now
  • Open the HP Easy Start software and select the Set up my Printer option and then accept the terms and conditions mentioned therein.
  • You will then be directed to the connect screen where your printer’s details will be listed.
  • If you do not find your printer listed in this page then retry connecting once again.
  • You have the option of renaming your printer once you are connected to it.
  • There is a keychain request prompt that asks you to enter your network’s password either manually or automatically.
  • Now you can follow the on screen instructions to complete the Envy 4510 wireless setup for Mac.
  • There are additional software that you can choose to install, like the HP Essential Software and HP Easy Scan.
  • In case you happen to change your network’s password sometime in between, then you will have to do the setup procedure once again.
  • Do a test print on your printer to make sure that the printer has been setup and installed successfully and also to verify the ink levels in the cartridges.

If you are unable to complete the 123.hp.com/envy4510 wireless setup for Mac, then call us anytime on our toll-free number 1-888-597-9290 for assistance. Visit our website at https://www.123hpcomoj4650.com